High-speed rotation roller
Horest
Rubber roller with excellent oil, heat (up to 150°C), and abrasion resistance.
Heatproof and low heat generating roller
Super Horest
Roller made using one of the highest strength high hardness polyurethanes with excellent abrasion resistance and waterproof properties.
Abrasion resistance and oil resistance polyurethane
TRUST U
Roller with high oil and abrasion resistance. (PAT)
Abrasion resistance and waterproof polyurethane
TRUST EPSILON
Roller manufactured using high hardness urethane material which gives it strength, solvent resistance, waterproofing, and rubber elasticity.
Conductive rubber roller
Conductive EPT / NBR
The roller with resistance against corona, heat (up to 150°C) and highly polar solvents.
The static electricity neutral fiber “Soldion” is included.
Coating roller
GAMMA TRUST
Roller with high strength and solvent resistance.
GAMMA TRUST has increased strength when compared with rollers using the same hardness polyurethane (in case of 55 Shore A).
Grooved technology
Metal and rubber rollers with custom grooves
Ultra-accurate grooved rollers increase coating liquid volume and achieves even coating.
Water absorbing sponge roller
SU Sponge
Sponge roller with high water absorption (moisture rate 300%).
Usage application: Installed in cleaning unit for semiconductor
This roller can also be used to prevent dew condensation.
Environmentally-friendly dust removing roller
Clean Dash Belt
Belt with sticky coating for removing dust in various use cases.
Cooling/Heating roller
Temperature control roller
Roller for use in waterless lithographic high speed printing
Chromium/Nickel/Ceramic
Various types of plated rollers
Super hydrophilic plated rollers used in continuous dampening systems and ink fountains.
Plated CFRP roller / Rubber CFRP roller
TF-carbon roller / TF rubber roller
CFRP rollers have the following advantages compared with iron/SUS rollers.
* Inertia moment is 1/5 or less than iron/SUS rollers
* Volume of self-weight deflection is 1/7 or less than iron/SUS
* Weight is 1/5 of iron/SUS
Saving weight by using aluminum instead of iron
Lightweight aluminum roller
The weight of aluminum rollers is 1/3 of rollers made from iron or SUS
